Flanges & Adapters
Pipe flanges and adapters to standard.
Generate pipe flanges, blanking plates and adapter rings to bolt-circle specs — STEP solids for machining or DXF for waterjet.
Flanges are pure parametrics: OD, bolt circle diameter, bolt count and bore. Describe the flange — or name a standard — and AiCadGen produces a correct flange, blanking plate or transition adapter. Get a STEP solid for machining or a DXF profile for waterjet and laser.
STEP (AP242)DXFSTL
Why use AiCadGen for this
- Bolt-circle patterns generated from PCD + count, or from a named standard.
- Raised faces, bores and adapter step features from a short description.
- STEP for machining, DXF for flat-cut blanks and gaskets.
Example prompts
- $Blanking flange, 150mm OD, 110mm bolt circle, 4x M10, 60mm bore
- $Adapter ring from 80mm to 60mm bore, 6mm thick, 6-bolt pattern
- $Raised-face flange, 100mm pipe, 8 bolt holes
- $Gasket profile to match a 150mm flange, 8mm holes
Frequently asked questions
Can I generate a matching gasket?
Yes — ask for a gasket profile to match a flange and you get a DXF with the bore and bolt-hole pattern for flat cutting.
Do I have to know the standard?
No. You can give raw numbers (OD, bolt circle, bolt count, bore) and skip standards entirely, or name one if you have it.